With the development of the economy, many industries have also developed, especially the machinery industry. Mechanical equipment is no longer single, and the modification of accessories makes it diversified. Let ‘s take a look at the structure of the flatbed trailer tailboard, and what are the advantages and functions? Does the difference in its structure and function also affect its price?

彩神ll用户登录 Structural composition-tail plate consists of: bearing platform, transmission mechanism (including lifting cylinder, closing cylinder, booster cylinder, square steel support, lifting arm, etc.), bumper, piping system, electronic control system (including fixed Electric control box and remote controller), oil source (including motor, oil pump, various hydraulic control valves, fuel tank, etc.).

Because the load-bearing platform is a wedge-shaped structure, when it is leveled on the ground, a lowering action is required to make the board point to the ground, so that a manual forklift or other hand can push (pull) the equipment up and down the load-bearing platform.

彩神ll用户登录 At present, there are four types of low (raising) heads commonly used in tail plates, and the tail plate structures produced by different manufacturers are different.

Transmission method: This equipment uses a car battery as the power source and a DC motor to transmit the load. The DC motor drives the high-pressure oil pump, and then the solenoid valve controls the movement of the hydraulic cylinder to drive the four-link mechanism. In this way, the bearing platform can complete various actions such as ascending and descending, and opening and closing the door.

Safety mechanism: Since the tailgate is installed at the rear of the vehicle and moves with the vehicle, in order to ensure driving safety and protection equipment, there must be warning devices and safety devices. The tailgate is not only equipped with safety flags and reflections on the back of the loading platform. Warning board, non-slip safety chain.

彩神ll用户登录 Flatbed trailer price flatbed trailer accessories

彩神ll用户登录  When the loading platform is in a horizontal position, it is only a line when viewed from 50m away. It is extremely difficult to find that when the following vehicles are driving at 80km / h, accidents are easy to occur. After the safety flag is installed, the flag sags under its own gravity until the loading platform is at a right angle. Two safety flags can be seen from a distance, giving people a warning and preventing the occurrence of a rear-end collision accident. To great effect. The role of the reflective warning board is: the reflective boards installed on the two sides of the back of the loading platform have a reflective function, especially when driving at night. After being illuminated by the lights, they will be found far ahead, which not only protects the equipment, but also prevents The rear-end collision accident played a certain role.

彩神ll用户登录 Function and operation

Tail plate is a type of hydraulically driven cargo loading and unloading equipment installed at the rear of trucks and various sealed vehicles. It can be used not only for loading and unloading goods, but also as the tail door of a van, so it is usually called a tail plate.

彩神ll用户登录 The operation of the tail plate is very simple. Only one person needs to control the "on" or "off" of the three electromagnets through the electrical buttons, which can realize various actions of the tail plate and complete the loading and unloading of the goods.

彩神ll用户登录 In addition, due to the design of the device, it is also used as a bridge board. When the bottom surface of the car is higher or lower than the cargo platform, and there is no other loading and unloading equipment, the end of the loading platform can be placed on the cargo platform to form a "bridge". The manual loading and unloading of the cargo can be completed in time. This is crucial.

Of course, the price of flatbed trailers varies according to different models and specifications. As a professional flatbed trailer manufacturer, Sinotrans Intelligent Group can customize different specifications according to customer needs. You can call our professionals.