What Should I Do If The Water Tank Of The Roller Is Leaking?
彩神ll用户登录 There is a problem with the quality of the water tank of the roller. What should I do if the water tank is leaking? Let's follow along with the editor to learn.
1. Check whether the water tank cover of the roller is closed tightly. If it is not fastened, the water tank cover should be fastened, and then check whether the water leakage of the water tank of the car is improved.
2. Fill the water tank of the road roller with gas, and the water in the water tank will seep out under pressure, so as to know where the car water tank is leaking, and then formulate a repair method.
3. Open the oil cover of the roller engine to see if there are traces of emulsification in the oil inside. If there are traces of emulsification, the engine should be disassembled and the cylinder gasket should be replaced immediately.
4. During the running of the roller, if the water tank ruptures due to a traffic accident or severe vibration, you can add a strong plugging agent to the water tank, or you can put some loose tobacco into the water tank to block the leak. Can solve the problem temporarily, and then go to the repair shop to repair according to the actual situation.
The roller彩神ll用户登录 water tank is an important component of the water-cooled engine. As an important component of the water-cooled engine heat dissipation circuit, it can absorb the heat of the cylinder block and prevent the engine from overheating. Because the specific heat capacity of water is large, the temperature rise after absorbing the heat of the cylinder block is not There are many, so the heat of the engine passes through the liquid circuit of cooling water, uses water as a heat carrier to conduct heat, and then dissipates heat in a convective manner through a large-area heat sink to maintain the proper operating temperature of the engine.
Previous: Application Advantages Of Telescopic Backhoe Loader
Next: The Importance Of Agricultural Spraying Uav To Agricultural Development